#ROUTER ADDRESS BAR ACCESS HOW TO#

LAN IP Address Set to 192.168.1.1/24 by default.DHCPv6 If your ISP supports IPv6 using DHCPv6-PD, you will need to assign the supplied Prefix length given from the ISP, enable the default IPv6 firewall, and define the LAN interfaces that will need IPv6 connectivity.

#ROUTER ADDRESS BAR ACCESS HOW TO#

See the How to Create a WAN Firewall Rule article for more information on the default firewall policies. To access your routers settings, you need the IP address, which can be found by typing 'cmd' in the Windows search bar. Use this option to tag the Internet connection with a VLAN ID. Find your routers IP address via Command Prompt. VLAN It is becoming more common for ISPs to provide FTTH (Fiber to the Home) and require that the Internet be distributed using a VLAN to separate Internet from IPTV and Voice services.This setting will forward the public IP from the ISP modem/router to the EdgeRouter. NOTE: It is recommended to configure the ISP supplied modem/router in bridge mode.

Configure a static IP address on your computer in the 192.168.1.0/24 range (for example 192.168.1.11). Connect an Ethernet cable from a computer to the eth0 interface on the EdgeRouter.Ģ. There are two examples below on how to do this on a Windows and macOS client.Ĭonnecting an Ethernet cable between the EdgeRouter and a workstation that is configured with a static IP address.ġ. Accessing the device requires you to configure a static IP address on the client machine (workstation). Applicable to the latest EdgeOS firmware on all EdgeRouter models.įollow the steps below to access the device via HTTPS using a web browser.See the How to Upgrade the EdgeOS Firmware article for more information.

It is highly recommend to upgrade to the most recent firmware release before following this guide.

Setup wizards were added to the Web UI starting from the EdgeOS v1.4.0 firmware.

Router address bar access